Selection of air pressure before use of pneumatic wrench

1. The amount of air pressure should be determined according to the material of the object and the torque of the pneumatic tool itself. To set the ideal air pressure, start from a low pressure and gradually increase the pressure until a satisfactory effect is achieved. Before using the tool, check the air pressure and never exceed the specified air pressure, otherwise the tool may burst. Air pressure is required, otherwise the power will not be able to burst.

2. The origin must use dry and dust-free ordinary compressed air, and it is strictly forbidden to use oxygen and any flammable gas to avoid accidental injury.

3. When the nail gun and the trachea are connected, unless the nailing work is performed, do not hold the trigger, so as to avoid accidental firing.

4. After each work, be sure to separate the trachea from the tool.

5. When multiple nail guns use a compressor, the capacity of the compressor must match it, otherwise it will cause insufficient air pressure.

Although pneumatic wrenches are widely used in some large-scale production machinery and equipment, many safety accidents have occurred recently. All operators are advised to pay attention to the operation matters when using the pneumatic wrench, and operate in strict accordance with the operation steps to achieve safe production and safe operation.

As one of the more commonly used tools in hardware tools, wrenches have also changed themselves with the advancement of technology. The pneumatic wrench is one of the new generation of hardware tools, and it is also the transformation of the original ecological wrench. Due to the simple structure of the wrench, the failure rate is low, and the user does not pay much attention to the use and maintenance. In fact, this is very dangerous, especially in small enterprises with incomplete safety measures.